Manufactured Home Site Preparation in Southwest Washington

A manufactured home still needs a properly prepared site.

Before the home arrives, the property may need a driveway, clearing, grading, utilities, septic, drainage, and a properly prepared foundation or support system.

Planning these improvements before delivery can make installation much smoother.

Start With the Site Plan

The first step is determining where the home will be located.

The site layout should consider:

  • Property setbacks

  • Access

  • Driveway

  • Septic

  • Well

  • Electrical service

  • Drainage

  • Foundation

  • Other structures

Local requirements should be confirmed before construction begins.

Clear the Building Area

The home site may need to be cleared of:

  • Trees

  • Brush

  • Stumps

  • Debris

Only the areas necessary for the project should be disturbed when practical.

Prepare the Driveway

The delivery of a manufactured home requires suitable access.

The driveway needs to accommodate the delivery equipment and installation process.

Depending on the property, this may require:

  • Clearing

  • Excavation

  • Grading

  • Culverts

  • Aggregate

  • Compaction

Prepare the Foundation Area

The home needs an appropriate support system designed for the specific installation.

Site excavation may be required to establish the correct elevations.

The contractor should follow the approved plans and applicable requirements.

Septic

If the property isn't served by public sewer, an onsite septic system may be necessary.

The septic system needs to be coordinated with the home location, well, driveway, and other site improvements.

Utilities

The site may also require:

  • Water

  • Electrical

  • Sewer or septic

  • Communications

  • Other utility connections

Planning utility routes before final grading can reduce unnecessary rework.

Drainage

Rainwater should be considered before the home is installed.

Proper grading helps direct water away from the building area and toward the appropriate drainage system.

Why Site Preparation Should Happen First

The manufactured home delivery is usually one of the final major steps.

The property should be ready before it arrives.

That means the:

Access

Building area

Foundation

Utilities

Septic

Drainage

should all be planned and coordinated ahead of time.

Rockridge Manufactured Home Site Preparation

Rockridge provides excavation and site-development services for properties throughout Lewis County, Cowlitz County, and Southwest Washington.

Our services include:

  • Land clearing

  • Excavation

  • Grading

  • Driveways

  • Foundations

  • Utilities

  • Septic

  • Drainage

Planning to place a manufactured home on your property? Contact Rockridge early so the site-development work can be coordinated with your installation schedule.

Manufactured-home installation and building requirements vary by jurisdiction and project. Verify current requirements with the applicable authorities.

Previous
Previous

How Much Does It Cost to Develop Land in Lewis County, Washington?

Next
Next

Foundation Excavation: Preparing a Building Site for Concrete